Covers and prevents sparks and embers from flying out of the pit – even in the wind. Helps prevent accidents, contains incendiary sparks, ash and soot. Both ends of “clam shell” pivot open, allowing access to tend fire. Handle on each side for easy access. Made of welded 1/4" x 1" solid steel flat bar framework and fine steel mesh screen (8 x 8 per sq. inch; 23 gauge steel wire). Height is 1/2 the diameter of the screen ie: 24" round is 12" High. High heat-resistant electrostatic applied, weather-resistant black finish. Made in the U.S.A.
Note: The pivot screen’s outer diameter requirement is approximately 1-1/2″ wider than the screen size – see diagram.
To determine fire pit screen size: Measure pit diameter and add 4 inches. (Example: Pit diameter is 30″. Add in the 4″ so screen size would be 34″ diameter screen. Be sure the specified dimension includes the additional 4″.)
Most orders ship within 10 to 14 working days. Pivot Fire Pit Screens over 30″ diameter ship by freight (on pallet).
For Larger Custom Sizes Give Us A Call